| Peer-Reviewed

Vibratory Gear Adaptive Transmission

Received: 5 October 2014     Accepted: 10 October 2014     Published: 27 December 2014
Views:       Downloads:
Abstract

Drives of machines which are used now do not possess ability to be adapted for extreme working conditions. Such conditions are connected with possible difficulties of motion because of deviations from operation norms (for example, because of long inactivity, deterioration of conditions of lubricant, minor damages, a temperature difference, etc.). In the conditions of impossibility of elimination of minor failures on the move (for example in aeronautical engineering) insignificant discrepancy of operation of service mechanism can serve as a cause of accident. Recently the technological direction of use of adaptive drive of machines is advanced. The adaptive drive mechanism contains the engine and the self-regulated transmission mechanism. The adaptive gear transmission mechanism with two degrees of freedom has ability to actuate an executive end-effector with a speed inversely to external load at constant engine power. It means that even in presence of handicap in motion of end-effector the drive mechanism breakage will not occur. The adaptive vibratory mechanism in the form of the closed gear differential with unbalanced masses can procure effective vibratory action on the end-effector. Such vibratory mechanism will procure the reliable overcoming of operational overloads. In offered work the describing of the vibratory mechanism with unbalanced masses is considered. Work is executed on the basis of mechanics laws.

Published in American Journal of Mechanics and Applications (Volume 2, Issue 6-1)

This article belongs to the Special Issue Adaptive Transmissions

DOI 10.11648/j.ajma.s.2014020601.15
Page(s) 25-28
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2014. Published by Science Publishing Group

Keywords

Gear Adaptive, Vibratory Acting, Differential Mechanism, Force Adaptation

References
[1] Ivanov K.S., Tultaev B. Toothed continuously variable transmission (CVT) – industrial realization. New Trends in Mechanism and Machine Science. Theory and Applications in Engineering. V. 7. Springer. ISSN 2211-0984. Transactions of 4-th Euro Conference on Mechanisms. Springer. Santander. Spain. 329-335. 2012.
[2] Ivanov K.S., Koilybayeva R.K., Ualiev G.U. Creation of Vibratory Gear Continuously Variable Transmission (CVT). 11th International Conference on Vibratory Problems (ICOVP 2013). Book of Abstracts. Lisbon. Portugal. 2013. P 91.
[3] Ivanov K.S. Paradox of mechanics – a basis of creation CVT, Transactions of 2-d IFToMM Asian Conference on Mechanisms and Machines Science, Tokyo, Japan. P. 245 – 264. 2012.
[4] Levitsky N.I. Theory of mechanisms and machines. Мoskow: Science, Main edition of physical and mathematical literature, 576 p. 1979.
[5] Ivanov K.S. Flywheel with variable distribution of masses. The copyright certificate. The patent of the USSR. №365503, 8th Jan 1973.
Cite This Article
  • APA Style

    Konstantin Ivanov, Zhilisbaeva K. S., Koilibaeva R. K. (2014). Vibratory Gear Adaptive Transmission. American Journal of Mechanics and Applications, 2(6-1), 25-28. https://doi.org/10.11648/j.ajma.s.2014020601.15

    Copy | Download

    ACS Style

    Konstantin Ivanov; Zhilisbaeva K. S.; Koilibaeva R. K. Vibratory Gear Adaptive Transmission. Am. J. Mech. Appl. 2014, 2(6-1), 25-28. doi: 10.11648/j.ajma.s.2014020601.15

    Copy | Download

    AMA Style

    Konstantin Ivanov, Zhilisbaeva K. S., Koilibaeva R. K. Vibratory Gear Adaptive Transmission. Am J Mech Appl. 2014;2(6-1):25-28. doi: 10.11648/j.ajma.s.2014020601.15

    Copy | Download

  • @article{10.11648/j.ajma.s.2014020601.15,
      author = {Konstantin Ivanov and Zhilisbaeva K. S. and Koilibaeva R. K.},
      title = {Vibratory Gear Adaptive Transmission},
      journal = {American Journal of Mechanics and Applications},
      volume = {2},
      number = {6-1},
      pages = {25-28},
      doi = {10.11648/j.ajma.s.2014020601.15},
      url = {https://doi.org/10.11648/j.ajma.s.2014020601.15},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajma.s.2014020601.15},
      abstract = {Drives of machines which are used now do not possess ability to be adapted for extreme working conditions. Such conditions are connected with possible difficulties of motion because of deviations from operation norms (for example, because of long inactivity, deterioration of conditions of lubricant, minor damages, a temperature difference, etc.). In the conditions of impossibility of elimination of minor failures on the move (for example in aeronautical engineering) insignificant discrepancy of operation of service mechanism can serve as a cause of accident. Recently the technological direction of use of adaptive drive of machines is advanced. The adaptive drive mechanism contains the engine and the self-regulated transmission mechanism. The adaptive gear transmission mechanism with two degrees of freedom has ability to actuate an executive end-effector with a speed inversely to external load at constant engine power. It means that even in presence of handicap in motion of end-effector the drive mechanism breakage will not occur. The adaptive vibratory mechanism in the form of the closed gear differential with unbalanced masses can procure effective vibratory action on the end-effector. Such vibratory mechanism will procure the reliable overcoming of operational overloads. In offered work the describing of the vibratory mechanism with unbalanced masses is considered. Work is executed on the basis of mechanics laws.},
     year = {2014}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Vibratory Gear Adaptive Transmission
    AU  - Konstantin Ivanov
    AU  - Zhilisbaeva K. S.
    AU  - Koilibaeva R. K.
    Y1  - 2014/12/27
    PY  - 2014
    N1  - https://doi.org/10.11648/j.ajma.s.2014020601.15
    DO  - 10.11648/j.ajma.s.2014020601.15
    T2  - American Journal of Mechanics and Applications
    JF  - American Journal of Mechanics and Applications
    JO  - American Journal of Mechanics and Applications
    SP  - 25
    EP  - 28
    PB  - Science Publishing Group
    SN  - 2376-6131
    UR  - https://doi.org/10.11648/j.ajma.s.2014020601.15
    AB  - Drives of machines which are used now do not possess ability to be adapted for extreme working conditions. Such conditions are connected with possible difficulties of motion because of deviations from operation norms (for example, because of long inactivity, deterioration of conditions of lubricant, minor damages, a temperature difference, etc.). In the conditions of impossibility of elimination of minor failures on the move (for example in aeronautical engineering) insignificant discrepancy of operation of service mechanism can serve as a cause of accident. Recently the technological direction of use of adaptive drive of machines is advanced. The adaptive drive mechanism contains the engine and the self-regulated transmission mechanism. The adaptive gear transmission mechanism with two degrees of freedom has ability to actuate an executive end-effector with a speed inversely to external load at constant engine power. It means that even in presence of handicap in motion of end-effector the drive mechanism breakage will not occur. The adaptive vibratory mechanism in the form of the closed gear differential with unbalanced masses can procure effective vibratory action on the end-effector. Such vibratory mechanism will procure the reliable overcoming of operational overloads. In offered work the describing of the vibratory mechanism with unbalanced masses is considered. Work is executed on the basis of mechanics laws.
    VL  - 2
    IS  - 6-1
    ER  - 

    Copy | Download

Author Information
  • Chair “Control Systems for Aerospace Engineering “, Almaty University of Power Engineering and Telecommunications, Almaty, Kazakhstan

  • Chair of Applied Mechanics, Kazakh National University named Al-Farabi, Almaty, Kazakhstan

  • Chair “Control Systems for Aerospace Engineering “, Almaty University of Power Engineering and Telecommunications, Almaty, Kazakhstan

  • Sections